Archives

November 23, 2011

Tuned Mass and Viscous Dampers


TMD’s are designed to dampen mostly low frequency vibrations that limit a structures use, e.g., vibration caused by walking on bridges and wind action on tall chimneys etc. All applications are purpose designed. (Contains 1 attachments.)



November 23, 2011

Viton


Viton sheeting offers superior resistance to aromatic solvents, oils, fuels, lubricants and most mineral acids. It has very good resistance to atmospheric oxidation and sunlight. Temperatures up to 250 degrees C. Trelleborg carries both Viton A and Viton B in stock in Australia and we also have the ability to View More »



November 23, 2011

Skirting Rubber Range


STD 70 Duro   A general purpose grade of natural rubber used for many quarrying and mining applications in dust and spillage control. Soft 50Duro   A softer grade natural rubber, with good tensile and elongations properties, it is ideally suited for conveyor skirting applications where belting wear is of View More »



November 23, 2011

Single Sphere Rubber Bellows


A moulded rubber bellow that provides a flexible, maintenance free pipe connector that compensates for thermal expansion, misalignment. Isolates vibrations and movement associated with pressure surges. Trelleborg expansion joints are certified and have approvals from DNV, Lloyds and Germanischer Lloyds. (Contains 1 attachments.)



November 23, 2011

Self Adhesive Neoprene Sponge Tape


Ideal for general enclosure sealing due to its superior compressibility, flexibility and good recovery characteristics, it has very good resistance to ozone and UV weathering. The peel off, self adhesive tape, makes it is extremely easy to use, even in vertical applications. Thickness range from 3mm to 25mm Width range View More »



November 23, 2011

Rubber Laminated Bearings


Elastomeric laminated bearings to meet all codes including AS 5100.4, Transit NZ Bridge Code, AASHTO, BS5400 part 9. Special sizes and shapes designed and tested to requirement. Loads up to 1500 tonne easily accomodated (Contains 1 attachments.)



November 23, 2011

Rubber Rail Crossing


Rubber panels designed to fit between the rails and the adjacent road. Manufactured to suit all types of rail and sleeper combinations. Panels fit into a fixed concrete edge beam. Manufactured from top quality rubber with a skid resistant surface. Very easy to install and remove for track maintenance. Very View More »



November 23, 2011

Rubber Ladder Fender


Rubber Ladder Fenders are designed for locations where traditional aluminium and steel ladders are constantly damaged by vehicle, boat, forklift or machinery impact. To alleviate these problems, the Trelleborg Ladder Fender is manufactured from rubber which resists deformation and provides protection for the structure. Rubber Ladder Fenders come in two View More »



November 23, 2011

Repair & Maintenance – Collapsible Containers


Trelleborg are able to mobilise teams from Brisbane and Perth to carry out repairs and maintenance on customer sites anywhere in Australia



November 23, 2011

Rail Track Isolation – FST


A sophisticated isolation system where the isolation of vibration (and hence noise) generated by a transiting vehicle on a rail track is a priority. The rail track “floats” on a rubber bearing system. Widely used in close proximity to noise sensitive structures such as performance halls, residences, schools and office View More »



November 23, 2011

Potable Water EPDM AS4020


High quality EPDM compound, which has been fully certified to AS4020-2005. The product has excellent ozone and ageing characteristics and has been especially developed for gasketing and sealing applications in drinking water systems. This product is now also carried in stock in rolls 1400mm wide in 3mm thick (Contains 1 View More »



November 23, 2011

Pot Bearings


Pot bearings to AS 5100.4 and BS 5400 part 9 up to 40,000kN ULS. One of the oldest designs and most widely used multidirectional support movement bearing that is known to most Structural Engineers (Contains 1 attachments.)



November 23, 2011

Pipe Expansion Joints


Trelleborg Expansion Joints are used to create secure and better pipe systems. They help to compensate for any bending, stretching and compression that may arise. In addition, they reduce vibrations and noise. They are used in industrial installations, offshore, dredging industry, water systems for power plants, in gas and drinking View More »



November 23, 2011

PHS Expansion Joint System


The TESA PHS expansion joint system is based on proven U.S. derived technology, originally developed for rapid airport runway repairs. The system combines a durable, impact resistant polymer header system with a rapid curing pourable two part PU self leveling joint sealant. The system is designed to provide a simple View More »



November 23, 2011

Peroxide Cured EPDM


A synthetic rubber with excellent ozone weathering properties this rubber has high rating in regard to acid and general chemical resistance. It is especially suitable for external or high temperature applications. It also can be used where sulphur free rubber is required (Contains 1 attachments.)



November 23, 2011

Orkot Industrial & Marine Bearings


Orkot® bearing materials are a range of thermoset composite bearing materials incorporating advanced polymer technologies. These consist of technical fabrics impregnated with thermosetting resins, evenly dispersed solid lubricates and further additives to ensure the optimum solution is reached to satisfy many engineering applications. Orkot® materials have many advantages over more View More »



November 23, 2011

Omega Seals


Omega type seals are commonly used for providing an seal between two adjacent concrete segments of an underwater submerged tunnel. These seals are usually fabric reinforced and subjected to large movements in up to three dimensions. The seal acts as a membrane mounted over the area between the tunnel sections. View More »



November 23, 2011

Nitrile Rubber


A multi-purpose grade synthetic rubber, with very good resistance to petroleum based fluids. It is also suitable for use with alcohols, mineral oils, hydraulic fluids, and animal or vegetable oils. (Contains 1 attachments.)



November 23, 2011

Nitrile Insertion


A multi-purpose grade synthetic rubber, with very good resistance to petroleum based fluids. It is also suitable for use with alcohols, mineral oils, hydraulic fluids, and animal or vegetable oils. The addition of a fabric insertion greatly improves tear strength. (Contains 1 attachments.)



November 23, 2011

Neoprene Rubber Sponge


Manufactured by the close mould expansion process, ensuring 100% non-interconnecting closed cells, this product is vastly superior to sponge manufactured by other methods. Has excellent mechanical properties and is not vulnerable to chemical and UV degradation, and will not absorb water. (Contains 1 attachments.)



November 23, 2011

Neoprene Rubber


A premium grade chloroprene sheeting, it has good weathering, heat and fire resistance properties. Neoprene has moderate resistance to petroleum based fluids. (Contains 1 attachments.)



November 23, 2011

Neoprene Insertion


The properties of this synthetic compound are superior to natural rubber in weathering, ozone, heat and fire resistance with reinforcement for improved tear resistance. (Contains 1 attachments.)



November 23, 2011

Natural Rubber Insertion – Nylon Insertion


Quality natural rubber sheeting, reinforced with a high strength monofilament nylon fabric. With excellent tear resistance, this product is especially suitable for high quality gasket manufacturing. (Contains 1 attachments.)



November 23, 2011

Natural Rubber Insertion


Industrial grade black natural rubber sheeting with plies of cotton reinforcement. It exhibits good resilience, abrasion resistance and tear strength. (Contains 1 attachments.)



November 23, 2011

Matting – Ribbed, Studded


Ribbed Matting   Low cost anti-slip matting for most commercial and industrial applications. 3mm thick x  1200mm wide x 10 mtr rolls Studded Flooring   Low cost anti-slip matting for most commercial and industrial applications. Available in black and can be polished to maintain appearance.   3mm thick x  1200mm wide x View More »



November 23, 2011

Marine Fenders (Replacement)


Rubber Marine Fenders used for replacement of older models not available any longer. Models include Lord Fenders, Raykin Fenders, Kleber Fenders, Morse Shear Fenders, Leg Fenders, Trellex Shear Fenders, Svedala Fenders, Seibu Fenders (Contains 1 attachments.)



November 23, 2011

Marine Fenders (New Install)


Cone, Arch, Cylindrical, Pneumatic, Sliding Fenders, D fenders all form an integral part of Marine Fendering area. All types are available in various sizes and can be designed to customers specifications, consultants are available at all times to discuss your specific needs Trelleborg Marine Systems are the main contacts for View More »



November 23, 2011

Inflatable Seals


Inflatable seals are commonly used for the sealing of gates and tunnels where there are large movements or variations in the contact sealing surface. Sealing is obtained by controlling the inflation pressure of the gas or fluid above the maximum hydrostatic pressure. Profiles are able to be developed for special View More »



November 23, 2011

Industrial Rubber Hose


A full range of High Specification  Trelleborg industrial rubber hoses are available ex our factory in France. Full details and all hose specifications are available from the Trelleborg Group web site.   www.trelleborg.com/industrialhose (Contains 1 attachments.)



November 23, 2011

Gina Seals


Gina seals are commonly used for providing a seal between two concrete structures on an underwater tunnel, or for sealing the temporary bulkhead at the end of the tunnel. These seals are often subjected to high hydrostatic pressures. The seal can be manufactured with a soft nipple on the sealing View More »



November 23, 2011

Expansion Joints


Trelleborg pipe expansion joints are made from highly abrasive resistant materials with excellent elongation properties. Expansion joints are produced with closed or open arch configurations which compensates for vibration, axial and radial movements typically associated in pipe lines. Trelleborg design and manufacture expansion joint configuration and lining material specifically to View More »



November 23, 2011

EPDM Rubber


A synthetic rubber with excellent ozone, weathering elevated temperature resistance. This rubber also has an increased rating in regard to acid and general chemical resistance. It is especially suitable for external use or higher temperature applications (Contains 1 attachments.)



November 23, 2011

SealEco-Elastoseal Waterproof Membrane


Rubber possesses unique properties that have been well-known for a long period of time. Trelleborg SealEco-Elastoseal provides an effective and durable membrane with high resistance to chemicals. It has a unique ability to withstand mechanical stresses in the form of pressure and movements. This provides unique benefits as a geomembrane View More »



November 23, 2011

Dust Cloth Rubber


Exceptionally flexible natural rubber sheet, with a fabric impression on both surfaces. Typically installed for dust sealing of vibrating screens and conveyor systems it is UV stabilised and has high tensile strength and elongation properties. Moulded grip strips & corners available together with extruded grip strip profile in 20 metre View More »



November 23, 2011

Dracone Barges


Dracone barges are a safe and efficient way to transport liquids across oceans and waterways. They are currently being used by military and commercial operators in many countries to transport fuel and waste water products across short to medium distances. They are readily deployed and their exceptional maneuverability makes them View More »



November 23, 2011

D Fender and D Buffers


D Style fender and buffers are widely on Jetties, Pontoons and Wharves and truck loading docks. A very large range of “D” & Square Fenders are available in sizes from 35mm to 500mm in the “D” & Square profile. A large variety of fixing methods can be adapted depending on product application. View More »



November 8, 2011

Trelleborg Hoses Clean up the Fishing Industry


A new application for Trelleborg Canalkler 250 Sewer Cleaning hose has been found in the Aquaculture Industry. These days much of the Salmon we eat is sustainably farmed in floating pens in the sea. Due to this farming the sea water is nutrient rich and weed growing on the underwater View More »



November 8, 2011

Winvenhoe Power Station, sealed by Trelleborg


Trelleborg is proudly supplying the Power Station of Wivenhoe with various types of sealing device, including discharge valve seals, guide vane seals and gate seals. Over the last 15 years, we have been providing the highest quality elastomeric compounds, ensuring the constant supply of power to the Australian power grid.